7
2. To clear the timer mode, press TIMER button for 16 times (one more press after it reaches 7.5
hours); the TIMER indicator will be off. Or POWER off the unit to reset all setting.
COOL button
1. Press the COOL button, if the water level is above the minimum level, the COOL indicator
will be turned on and the pump will start working.
2. After about 3 minutes, the comfortable cool wind with moisture will come out from the unit.
3. Press the COOL button again to turn the COOL mode off. The COOL indicator will be
turned off too and fresh dry wind will come out.
Note:
1. If COOL mode is selected when the water is under the low level or no water at all, the
alarm will sound after 90 sec. The COOL indicator will blink continuously for about 10 sec.
After 10 sec, the alarm stops and the COOL mode will be turned off too.
2. The unit can be used without water as a normal electric fan. In this situation, please keep
the COOL mode OFF.
Specifications
Rated
Voltage
Rated
Frequency
Rated
Power
Water
Consumption
Water
Tank
Capacity
Dimensions
(inch) WxDxH
N.W.
(lbs)
120V~
60Hz 80W 0.2-0.25L/h 4L
12.13x11.50x 34.76 11.24
Cleaning and Maintenance
z IMPORTANT! Disconnect the plug from the power outlet before cleaning and maintenance
z The body of the unit should be cleaned with damp cloth moistened with mild soap. Do not
clean it with wet cloth.
z From time to time, depending on the nature of your water supply, you may need to clean the
interior of the water tank. This can be done in the following manner:
1) Fill the water tank with 1 cup (8 oz.) undiluted white vinegar;
2) Let the solution stand for 20 minutes.
3) With the vinegar in the water tank, clean all interior surfaces with a soft cloth or brush to
help remove scale.
4) Rinse the water tank thoroughly with clean water to remove scale and cleaning solution.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals